|
Veneer Machinery
|
Log Handling System
Complete log handling system of a plywood mill including log conveyors from hot water vat to debarker, scanning system, cut-off saw & waste conveyors. Log diameter max. 32" and length 6 m.
|
Rotary lathes
4', 5', 6' Raute, 4', 5' & 8' Coe & 8'/10'Premier & PMI
|
Clippers
6' & 8' Raute, 8' Elliot Bay, 110" Prentice, 6' Merritt Rotary
|
Peeling line 4' Raute
4' Raute peeling line including lathe charger, double spindle lathe (inner spindle 65 mm), 2-deck tray, Elliot Bay clipper and manual stacking.
|
Peeling Line, 8' COE
8' COE peeling line including block storage, lathe charger, dual spindle lathe, single-deck tray, Durand rotary clipper, & two 1-bin stackers, veneer chipper.
|
Peeling Line, 8'x500 mm FEZER
8' peeling line, made 2002, max. block diameter 500 mm, including block storage conveyor, lathe charger, double spindle lathe, 2-deck tray,Fezer rotary clipper & stacking on 2 lift tables
|
Peeling Line 8' COE&XY-charger
8'Coe peeling line. Included: block storage, Coe XY-charger, M-244 dual spindle lathe, 3-deck tray, Durand-rotary clipper & 3-bin vacuum stacker
|
Peeling Line, 10' x 900 mmCremona
10' Cremona/Olm peeling line with XY-charger, veneer conveyor, Olm clipper and stacker, max. log diameter 900 mm, knife lenght 2700 mm
|
Screen Dryer Keller 5 section
Specially priced KELLER 3-deck 5-section S-type screen jet press dryer (4.0 meter working width, hot oil heated, capacity 1.3 m3/h), made in 1988
|
Screen Press Dryer Babcock
Two BABCOCK press dryers (4-sections and 5-sections plus one cooler each dryer, working width 4.0 m, made in 1993)
|
Screen Dryer Proctor&Schwartz
Screen Dryer, natural gas heated, single deck, heating section 28.7 m long, speed 41 m/min,when 0.8 mm oak veneer is dried.
|
Roller Jet Dryer Coe M-72 4D 23&26 sections
COE roller jet dryers, 23-section & 26-section 4-deck COE roller jet dryers, working width 4.5 m, steam heated, with loaders and unloaders, longer dryer has COE 10-bin dry veneer stacking system
|
Veneer Roller Dryer
SCHILDE, 9-section, 3-decks, operating width 3 m, capacity 2.25 m3/h, year 1976,
|
Veneer Slicer 12' - Capital
CAPITAL 12 ft veneer slicer, knife lenght 12'=165", hydraulic flitch table, vacuum outfeed table with turnover,DC digital feed with ball screws, veneer thickness 0,25-2,5 mm.Main drive 60 hp DC.
|
Veneer Slicing Mill Fezer
Fezer Slicing mill includes Fezer Slicer FM 30 slicer with Merry-go-Around, Fezer mini-press-dryer (2 sections, 3.6 m wide screen, capacity 225 sqm per hour based on 1.5 mm veneer), 2 veneer quillotines.
|
Veneer Slicer Marunaka SL-250 &350
2 Marunaka Veneer Slicers with Merry-go-Around conveyors, models SL-250 and SL-350. New 1995. In addition 2 Marunaka Roller Dryers, model DR-6 are included in the package.
|
Face Veneer Splicer Ruckle
9' Ruckle splicer, Model FLM 28, Veneer lenght 800-2780mm, thickness 0.5-1.5 mm,max.capacity 40 joints/min. New 1997.
|
Rotary Cut Veneer Mill
Including Nicholson debarker, cut-off saw, 8 ft COE peeling line and 18-section Moore roller jet dryer and wood waste handling
|
Rotary Cut Veneer Mill
Included 8'/10' Premier/Plymac peeling line with rotary clipper and 6-bin stacker and 20-section 4-deck Plymac roller jet dryer with 10-bin dry veneer stacker
|
Rotary Cut Veneer Mill
Hardwood veneer mill with Morbark debarker, 4' and 5' peeling lines, veneer hog, Coe roller jet dryer (10-sections 4-decks, 4.5 m3/h), two Coe 4-deck 8 sections dryers, Ruckle guillotine, Diehl splicer
|
Rotary Cut Veneer Mill
Veneer mill including Cambio debarker, swing cut-off saw, 8' COE peeling line with mechanical charger, 3-deck tray and manual stacking on lift table, waste handling.
|
Small Log Frame Saw
AHLSTROM small log frame saw, capacity 120-140 m3/shift, max. log diameter 600 mm
|
|
8' Durand XY-charger
This charger comes with a year old control system and new Camera scanning. Excellent condition.
|
Marunaka SL250 Slicer
Marunaka Slicer without Merry-go-around return conveyor system.Max. lumber size W= 250 mm x H= 240 mm, max. slicing thickness 3.2 mm, max lumber lenght 2490 mm. Feet motor 15 HP. Inc. 9 spare knives & 3 counter knives.
|
Face Veneer Slicer Marunaka SL 25T
Marunaka Veneer slicer with Merry-go-around conveyor system, max.lumber slicing 10"x10", max. lumber lenght 2510mm, max. veneer thickness 9.5mm depending on wood species & moist.,cap. 8 veneer pieces/min., new 1990, Good condition
|
5' RAUTE Peeling line
Complete 5' small log peeling line. Line started 2001. Inc. block conveyor, XY-lathe charger, dual spindel lathe. 2-tray conveyor, rotary clipper. Good condition.
|
5' RAUTE peeling line
Complete RAUTE small log peeling line. Included: block conveyor, XY-charger with camera scanner, dual spindel veneer lathe, 3-deck tray conveyor, rotary clipper & 4-bin stacker. New 1991. Shut down 2005. Good condition. (j)
|
Raute Roller Dryer 4-D, 16-S
Modern, high capacity, steam heated RAUTE Roller Jet Dryer with loader & unloader, 4 drying decks, 16 heated sections plus 2 cooling sections,roller length 4800 mm,installed 2001,good condition capacity 8 m3/hour.
|
RAUTE Roller Dryer 4-D,12-S
Complete, modern, steam heated RAUTE Roller Jet dryer with loader & unloader, 4 drying decks, 12 heated sections, 2 cooling sections. Roller lenght 4800 mm. New 2001. Shut down 2005. Very good condition.
|
Paper Impregnating Line
Caratsch Horizontal Paper Impregnating Line for production of shuttering film overlays. Raw material : Kraft paper 40-300 gr/m2 and width 1000-2800mm, phenolic resin, max. production speed 60 m/min., heating by thermal oil. As good as new. Manufact. year 1997.
|
PARQUET Flooring "Pergo" type
Flooring plant including the following main machinery: 1) Siempelkamp 4'x8'x20-opening HPL heating/cooling press with loader&unloader to produce superhard overlays, daylight 120 mm, specific pressure 250 bars. 2) Melamine press line for overlaying panels with superhard overlays. Platensize 1.5 x 6 m. 3) Rip sawing and tongue/grooving machining line to produce 200 mm x 1200 mm parquet planks. Capacity 36-48 planks/min.
|
Overlaying Pressline SIEMPELKAMP
SIEMPELKAMP short cycle pressline, hot platen size 2250 x5750 mm, min. panel size 1530 x 5200 mm., panel thickness 8-38 mm, daylight 250 mm, max specific pressure 30 kg/cm2, max.capacity 90 cycles/hour. New in 1980. (g)
|
Peeling line 4' Coe
4' Coe Peeling line with pendulum charger, 56" knife lenght, dual spindles, 3-deck tray conveyor, pneumatic clipper and manual sorting conveyor
|
Roller Het Dryer Raute 4D 12 sections
Two RAUTE 4-deck 12-section roller jet dryers (steam heated, steam pressure 15 kg/cm2, capacity 6 m3/hour) with loaders, unloaders,crossing stations and manual sorting conveyot lenght of the drying line 44.2 m
|
|
|
Plywood Machinery
|
PrePress
Fjellman 5' x 9',5' x 10',6' x 12'
|
Hot Press Line
Williams White 5' x 10' x 10-opening hot press with charger
|
Hot Press Line
Williams White 4' x 8' x 24-opening press with prepress (reconditioned 3 years ago),
|
Hot Press Line
Fjellman 4' x 8' x 28-opening hot presses with Globe prepress
|
Hot Press Line
Almost new FJELLMAN 6' x 12' x 7-opening plywood press with belt through infeed system and automatic stacker (daylight 175 mm, spec. pressure 35 kg/cm2
|
Hot Press Line
Possible to buy also 6' x 12' Fjellman prepress. Excellent condition. Suitable also for parquet manufacturing.
|
Trim Sawlines
Globe and Jenkings with panel turner & 3-bin stacker
|
Sander
2-head 6' & 8' Steinemann
|
Sander
5'Kimwood 6-head sanding line with 3-stacking bins
|
Sander
6'Steinemann 8-head sanding line with 3-bin stacker
|
Blockboard Machinery
Softwood plywood mill based on 8' peeling line & two roller dryers (panel size 4' x 8', veneer thickness 1/8"), two press lines, trimming and sanding lines
|
Chipper
Black Clawson 78" veneer chipper (motor 150 HP),
|
Plywood Mill Machinery for 4' x 8' plywood
Complete Soft Wood Plywood Mill machinery is for sale. The machinery consists of a 65' long log deck, crook saw, three lock kickers for the debarker # 1, two Nicholson ring debarkers, 72" three blade circular type block cut-off saw, following chippers (Arashsmith Lilly Pad chipper, two Kockums 76" & 84" disc chippers, First 8' peeling line with Coe XY-charger, three-deck tray conveyor, Durand rotary clipper, 3-deck strip tray and strip sorting conveyor, two overhead conveyors to two one bin Durand vacuum stacker, Second 8' Coe peeling line with geometric charger, three-tray tray conveyor, Durand rotary clipper, 3-deck strip tray and sorting conveyor, two overhead conveyors to single bin Durand vacuum stacker. First veneer drying line consisting Durand feeder system, COE M72 steam heated 4-deck 26-heated section roller jet dryer, and 12-bin Coe dry veneer stacking system. Second veneer drying line consists of Durand feeder system, COE M72 steam heated 4-deck 23-section roller jet dryer, and manual veneer sorting from round table, one stack turner, one 99" core saw, one Superior continous gluing and lay-up line, three Superios 4' x 8' prepresses, three Superior 4' x 8' x 30-opening hot presses, plywood trim saw line with three stacking bins, plywood liquid patch line, Globe plywood sanding line. Plus additional equipment and spare parts.
|
|
|
Particleboard Machinery
|
Chipper
Jeffrey hammer hog (motor 200 HP)
|
Drum Dryer
Productization 12' x 50' only the drum and trunions, two 3-pass MEC 12' x 60' with McConnel burners
|
Particleboard Mill Machinery
Siempelkamp system, press 4' x 8' x 4-openings, panel thickness 8 - 25 mm, forming on Al-cauls, capacity 35 m3/day
|
Particleboard Mill Machinery
Two Fjellman systems, press 6'x11.4' x 11-openings and 4'x8'x9-openings 12 - 30 mm thickness, capacity 85 m3/d and 35 m3/d
|
Particleboard Mill machinery
Two complete thin particleboard mills based on 4' and 8' MENDE systems ( capacity 80 and 160 m3/day, 3 - 8.5 mm continuous panel)
|
Particleboard Mill Machinery
Complete particleboard mill based on Siempelkamp 5' x 18' x 7-opening press with tarybelt loader (215 m3/day on 3/4" basis) including 6-head sander and Siempelkamp 5' x 18' Melamine laminating line
|
Particleboard Mill Machinery
Washington Iron Works system, press 4'x8'x24-openings with Al-cauls, operated from 1962 to 2001, complete machinery, specially priced
|
|
|
OSB Mill Machinery
|
OSB Mill
Complete OSB-mill capacity 340 m3/day, based on a new 8' x 16' x 8-opening pressline. Built in 1986, shut down in 1998. Good condition
|
OSB Mill
Uncomplete OSB-mill machinery based on Siempelkamp 8'x16'x 6-open. press, capacity 200 m3/d, thickness 6.3 - 11.1 mm, forming on AL-cauls, spec. pressure 35 kg/cm2. Included also for the press heating and a flake dryer
|
OSB Mill
Complete OSB-mill based on a used 4'x24'x16-opening WIW's press, capacity 510 m3/d
|
OSB Mill
Complete OSB- mill based on WIW 4'x24'x14-opening press, capacity 375 m3/day on 9.5 mm basis . Included also 2-CAE short block flakers, 2-MEC drum dryers, CAE-blending, 4-formers, panel trimming. Built in 1985. Shut down in 1997. Machinery will be reconditioned.
|
OSB Mill
Uncomplete mill, capacity 88,500 m3/year on 9.5 mm basis. Available a Diefenbacher press 4'x16'x16-openings with loader and unloader and the drum dryer.
|
|
|
MDF-Mill Machinery
|
MDF Plant
Complete MDF-plant, capacity 310 m3/d, panel thickness 11-38 mm. Main machinery: three Sunds refiner, two flash dryers, Siempelkamp 5' x 24' x 6-opening press, trim saw system and panel stacling.
|
MDF Plant
Complete MDF-plant, capacity 450 m3/day, two Sprout Bauer refiners, WIW press 4' x 24' x 16 -openings, manufacturing started 1979 and the mill was shut down in 2001..
|
MDF Plant
Complete MDF-plant based on 8'x98' single opening steam injection press, 52-hydr. cylinders, capacity 445 m3/d, Built in 1999 and shut down in 2001.
|
MDF Plant
Complete MENDE MDF-plant, calander press, panel width 2440 mm net, capacity 175 m3/day based on 3.2 mm thickness, continuous panel thickness 2.5 - 6.5 mm, one 36" refiner, prepress . Thermo-oil heated hot press. Urea- resin.
|
MDF Plant
Uncomplete MDF-plant, capacity 340 m3/d. Included three Sunds defibrators, three glue blenders, Siempelkamp prepress and 5'x18'x8-opening press. Everything else is dismantled except the press. . Asplund L-42 pressurized refiner with digester
|
|
|
Hardboard Machinery
|
Hardboard Press
Motala hardboard press with loader and unloader, net board size 54" x 221" x 30-openings
|
Hardboard Press
Siempelkamp 54"x104"x20-opening hardboard press with loader and unloader.. Specific pressure 68 kg/cm2 . Two main rams. Al-caul circulation not included. Shut down in 2003.
|
Hardboard Mill
Hardboard mill based on the press with loader, unloader and hydraulic unit WIW 54" x 208" x 20-opening press line.
|
|
|
Overlaying Press Lines
|
Press Line
SIEMPELKAMP single opening Melamine pressline, panel size 4' x 10', 25 kg/cm2, 800 - 1200 panels/ 24 hrs, 4 sets of cauls included, manual lay-up, automatic infeed/outfeed, built in 1970's
|
Pressline
Siempelkamp 5'x18' Melamine pressline with panel feeder, lay-up conveyor, automatic loader/unloader system, stacker and SCMI panel saw. Built in 1973, rebuilt in 1996 and shut down in 2004. Electrics 120/440 V, 60 Hz.
|
Pressline
WEMHOHNER short cycle pressline (5'x19', 30 kg/cm2) in operation until May 1999. Modern line.
|
Pressline
SIEMPELKAMP short cycle press with tray belt loader and unloader only. (7' x 17', 35 kg/cm2). Mfg. year 1978. Used only one year
|
Pressline
DIEFENBACHER short cycle pressline, (2.1x5.1 m, , mfg.. year 1972, up-graded 1988, good condition,
|
Pressline
SIMINPIANTI short cycle press line, 2.3 x 6.7 m x 1-opening, 12.8 kg/cm2, built in 1983, rebuilt in 2001.
|
Pressline
New SENNERSKOV short cycle line ( 2 x 3 m = 6' x 9', 40 kg/cm2, 300 mm daylight). Included feeder, brush, lay-up station, press, vacuum unloader, 2-bin stacker. Suitable for flooring. RAUMA-REPOLA concrete form pressline with belt tray loader and hardchromed press platens, based on press size 1570 x 3400 mm x 10-openings, panel thickness 3 - 30 mm, 20 kg/cm2
|
Pressline
WEMHOHNER short cycle pressline, belt tray loader, platen size 2300 x 5700 mm, 10 kg/cm2, good for door pressing.
|
Pressline
New COLOMBO single opening press with Mylar-belt infeed, platen size 5' x 12', 8 kg/cm2.for veneering
|
Pressline
BURKLE 5' x 10' thru feed hot press with Mylar-belt infeed for veneering
|
Pressline
BURKLE 5' x 10' thru feed hot press with Mylar-belt infeed for veneering
|
Pressline
SIMINPIANTI 5' x 11-1/2" thru feed pressline complete with Omma 4-roll glue spreader, lay-up table, Mylar-belt infeed. Good condition.
|
Pressline
SIMINPIANTI Mylar-belt infeed press, 2.75 x 14 m x 1-opening, 11 kg/cm2. Press was used for making door, plywood and for overlaying panels.
|
|
|
Saw Mill Machinery
|
Sawmill
FRICK Timber Tiger sawmill, 54" blade
|
Sawmill
HURDLE sawmill, 3-head block carriage, Frick edger
|
Scragg Mill
COOPER Tandem Scragg Mill, max. log length 13' and diameter 18". Capacity 8 to 10 logs/minute.
|
Band Mill
Chip-n-Saw , max. diameter 12", max. squaerdsd 8' x 8', 3-125 HP & 1-150HP ,LI> BREWCO super band mill, max. log diameter 21", sawing speed 22 m/min when 4"x4". Inclided 7 conveyors.
|
I-Joist Machinery 300 FPM
Complete I-Joist manufacturing machinery.Wooden I-Joist size min.1.5 x 9.5", max.3.5 x 24 ". Joist lenght 34 ft to 80 ft. Flange raw material 2" x 3" or 2" x 4" soft wood lumber or LVL. Web material 3/8" or 7/16" OSB, lenght 4'. Fenolic resin. Max speed 300 FPM. Main machinery Flange and web reparations, I-Joist assembly machine, flying cut-off saw. Wicket curing chamber.Bundle nestler. Strapping & wrapping stations. Manufact. years 1996 and 2000.Shut down 2006. Good condition.
|
|
|
Briquette Making Machinery
|
Briquette Mill
Complete briquette mill with drum dryer, screen, hammer mill, silos, Pawert-SPMII-90/200 briquette press (capacity 2400 kg/h), diameter of briquette 90 mm) and Hausmann briquette press FH2/90/200 (capacity 2400 kg/h). Excellent condition
|
|
|
Laminated Veneer Lumber Machinery
|
LVL Machine
New and partly used LVL making machinery based on 4'x40'x1-opening press (continuous product, capacity 1.63 m3/hr, max. LVL thickness 3"). Included veneer tester, veneer scarfing line, veneer feeding, gluing and lay-up system, 4'x8' prepress, hot press, cut-off saw, unloading conveyors)
|
LVL Machine
Used LVL making machinery based on 4'x80'x4-opening press, max. panel thickness 3"..Max. specific pressure 20 kg/cm2. Included veneer tester, veneer scarfing, gluing and lay-up system, hot press, cut-off saw, unloading conveyors and rip saw.
|
Boiler
1 pc Konus wood waste fired thermo-oil boiler, capacity 7 MW/h each
|
Boiler
Hurst wood waste fired boiler (50000 lbs/h steam, 150 PSI)
|
|
|
|
